How to flash Nokia phone using JAF flashing tool
JAF flashing tool is another popular method after phoenix to flash Nokia Phones. There are lots of people who does not how to use JAF, so here we are going to guide you how to flash your phone using the JAF method.
Before Following how to use JAF method to flash Nokia device, you need to download firmware compatible for your phone.
Download Firmware for your Phone
In order to download firmware for your phone you can use Nokia Firmware Editor utility. You can download it from here, after downloading extract the files. You will get several files, in which you have to open NokiaFirmwareEditorStd.exe.
Once NokiaFirmwareEditorStd.exe is opened click on “Download Firmware” button. It will ask you to enter the product code of your phone (to know the product code, open your phone dialer and type *#0000#, there you will get the product code).
Once you have enter the product code “Nokia Firmware Editor” will start downloading the firmware files on the computer. Once firmware is downloaded you can see it in the Nokia Firmware EditorLIGHT folder.
Now, you have to move these files to
- “C:Program FilesNokiaPhoenix” (for Windows 32 bit users)
- “C:Program Files (x86)NokiaPhoenixProducts” (for Windows 64 bit users)
How to use JAF to Flash your Phone
1. Download JAF 1.98.62 Package and Extract it on your computer. After extracting you will get JAF PKEY Emulator v3.exe and JAF Setup 1.98.62.exe files.
2. Install JAF Setup 1.98.62.exe on your computer (while installing, you will get few errors, ignore or skip them).
3. Open JAF PKEY Emulator v3.exe and under the “STEP 1“, select “Random PKEY Raskal SN“. And click on “GO” button (if you are trying to run JAF PKEY Emulator v3.exe on Windows 7 then you have to set Compatibility mode to XP SP3 and Run as Administrator).
4. Once you press GO button, it will automatically open J.A.F. You will get “Error: Box driver not installed“, click on OK button to launch JAF.
5. When J.A.F is launched, click on the BB5 Tab.
6. Under Flash Settings, click on “Manual Flash“, “Dead USB” and then “use INI“.
7. After selecting “Use INI“, it will automatically open a list of Phone Model. Select your Phone from the list and click on “OK” button.
8. You will see Green Light appears under Flash Settings (MCU, PMM, CNT). Which means J.A.F is ready to flash your phone. Now, Click on “Flash” Button to start flashing.
9. Now, it will give you a warning notification “Downgrading will kill the Phone”, igonore this warning and click on “YES” button to continue flashing.
10. Now, in the status erea you will see a message “Press Power on Now“. Which means you have to switch on your phone immediately, once you have switched on your phone and J.A.F has detected your phone you will see “Searching for phone…found” message in the status of J.A.F. Flashing will be continued.
11. Normally flashing will be completed in few minutes. Once flashing is completed you will see “Done” message in the Status of J.A.F. Your phone will be restarted automatically.
12. Now, remove the cable from phone. It will now show the local mode screen, as when you start your phone for the first time.
Now, you have learned to flash your phone with any firmware. If you want to reset your phone then read Hard/Soft reset Nokia phone.
We have created this tutorial with lots of hard work for those who want to learn how to flash their phone using J.A.F method. If you find this tutorial useful then we will love to hear your valuable comments, and dont forgot to share it with your friends.
Cool
hari om mobile jetpua
After starting JAF, when I click on ‘Use INI’, I can’t find my phone model i.e. RM-504 (Nokia 5530 XpressMusic). Any suggestions?
P.S. I did not use Nokia Firmware Editor. I am trying to install Symbian Anna v7.5 on my phone, and got the firmware from some other site.
Nokia 5530 XpressMusic is old Phone. So, the above JAF software does not support it. You have to find the JAF software which support your Phone.
download latest ini for jaf n it works ..!!!
i hav downloaded latest and i got my nokia model(2690) but after tat its not showing green in Green Light under Flash Settings (MCU, PMM, CNT) wat to do plz help me….
wOW…..pretty awesome…i gonna be use use this tool…my phone was dead…let’s do with it….
Is Nokia firmware editor & navifirm the same, do they provide the same official firmware files?
hey how to get nokia s60v5 devide back to original firmware after flashing..?
my cell phone does not want to send a massger
after found the phone it shows that “unable to read init data”….What this!! plz solve it
After clicking flash.. jaf says “can’t backuo IMEI”
Mail me at : shaheen.sharyar@gmail.com
fbook: honey sharyar[choose timeline activated]
Guys in here i have learned few steps/tips/tricks i always wanted to explore more out of more. The exact words i can explain in that i always wanted to get a program and use it for what it is not made for like “mkdosfs.com” is an ap for increasing/decreasing size of memory card and any data travler. But i thint we can use it for increasing the size of mobiles partition like rofs/rofs2.
Mail me at : shaheen.sharyar@gmail.com
fbook: honey sharyar[choose timeline activated]
Guys in here i have learned few steps/tips/tricks i always wanted to explore more out of more. The exact words i can explain in that i always wanted to get a program and use it for what it is not made for like “mkdosfs.com” is an ap for increasing/decreasing size of memory card and any data travler. But i thint we can use it for increasing the size of mobiles partition like rofs/rofs2.
Please
after all this procedure … phone won’t restart .. i think it’s irreparable.
I can not find the “product code” code in Nokia 5230 RM588. When used *#0000# it doesn’t output the product code but everything else!
Firmware: “V 51.0.002” & Language Set: 01
hope it will go 😀
After the flashing the local mode screen was frozen. It was not even possible to switch the phone off. Taking out the battery and putting it in again solved the problem. The phone started perfectly.
Thank you for the tutorial.
i can’t found my model nokia c2 00
in phone model
and nokia firmware editor cannot found my code
my code is 059H0T3
please help me.
my email id is
monu.mkskumar@gmail.com
i download my nokia firmware and paste it in phoenix
but still i can’t find my model in jaf what i do?
When I select manual flash in jaf I can’t access mcu files.pls help
Searching for default location of ini…
Checking path: ProductsRM-240
Searching for JAF saved location of ini…
Checking path: C:Program FilesNokiaPhoenixProductsRM-240
Scanning ini files…
Searching for default location of ini…
Checking path: ProductsRM-240
Checking path: C:Program FilesNokiaPhoenixProductsRM-240
FILES SET FOR FLASHING:
MCU Flash file: C:Program FilesNokiaPhoenixProductsRM-240rm240__10.00.mcusw
PPM Flash file: C:Program FilesNokiaPhoenixProductsRM-240rm240__10.00.ppm_c
CNT Flash file: C:Program FilesNokiaPhoenixProductsRM-240rm240__10.00_ism_019.image_c_als
APE Variant file: NONE
Languages in ppm: English,German,French,Italian,Dutch,Spanish,Turkish,Portuguese
Backing up CRT…
Detected P-KEY: 9000AAC9
P-key nokia module version 01.02
Init usb communication…
Reading IMEI…
Failed! Aborting!
Failed to backup CRT…
Detected P-KEY: 9000AAC9
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
Sending RAW loader…
Using 06.02.002
Elf2flash 07.14.000
CMT RAW loader…
Patching RAW boot step1…
Patching RAW boot step3…
Sending RAW Loader…
……………….Loader Sent!
Stage 2 starting…………………………………………………………………Loader Sent!
Stage 3 starting………………Phone prepared OK!
Waiting for the phone to boot…
Searching for phone…
Phone failed to boot in flash mode CMT…
how to solve this problem
You Should install Nokia PC Suite First Before flashing
actually while updating with phoenix,my pc got crashed and restated unfortunately and from then onwards, it fails to refurbish the phone. even when i tried with jaf,and with above method, but it says
Phone failed to boot in flash mode CMT…
what can i do get my phone back.
please help
why my phone X6-00 don’t have product code ??
I can not find the “product code” …. 🙁
will this erase data on Lumia 610 ?
hello,
i tried the app, but my phone is not listed.
i have the nokia mobile E6-00.
thanks for your help.
Hey what about download firmware from different site and use it with jaf .. Does it is possible for e6
When I initially commented I clicked the “Notify me when new comments are added” checkbox and now each
time a comment is added I get several e-mails with
the same comment. Is there any way you can remove me from that service?
Thanks!
I cant see my model 5233 when i tick “use ini” and even the note “BOX DRIVER NOT INSTALLED” does not apper when i click on GO. Please help me bro….
Will this clear the contact service problem
Whats up very cool web site!! Man .. Beautiful .
. Wonderful .. I will bookmark your site and take the feeds additionally?
I am glad to search out so many useful info right here within the
post, we need develop more strategies on
this regard, thank you for sharing. . . . . .
i cant get any settings on my lumiar 610
how do i get started with synchronising my lumiar 610 to my pc
I CANT FIND MY PHONE NOKIA E7
Wow that was odd. I just wrote an extremely long comment but after
I clicked submit my comment didn’t show up. Grrrr… well I’m not writing all that over again.
Anyhow, just wanted to say wonderful blog!
After selecting “Use INI“, it will automatically open a list of Phone Model.
But doesn’t include my phone model i.e., nokia C5 whats the problem … ?
It did not include my phone model after I selected ‘USE INI’. Nokia x2-oo and asha 200; pls help. Thnx
I’m truly enjoying the design and layout of your website. It’s a very easy on the eyes
which makes it much more pleasant for me to come
here and visit more often. Did you hire out a
developer to create your theme? Fantastic work!
when i press use ini jaf not showing any device
i need help
Powering JCOP simulator …
ERROR: JCSIMU_open_socket connect socket: 10013
ERROR: JCSIMU_reset_card initialize
ERROR: Cannot get ATR from JCOP simulator!
Getting this error in pkey
Please solve
hiii..guys.
here i got problemm with my nokia expressmusic. i need to flash it. so to get data package downloaded do i need to use my phone product code only or wt??? cuz when im using my product code in phoenix its showing server couldn’t find product code… so wt to do???
guys plzz help me out… u will be highly appreciated for ur great help.
Thnx.. Bro for your help.
JAF version 1.98.62
Detected PKEY: 9000AAC9
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.172.0
Changing mode…Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:Program FilesNokiaPhoenixProducts\
Searching for default location of ini…
Checking path: Products\
Searching for JAF saved location of ini…
Checking path: C:Program FilesNokiaPhoenixProducts\
No ini files found…
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:Program FilesNokiaPhoenixProductsRM-356
Searching for default location of ini…
Checking path: ProductsRM-356
Searching for JAF saved location of ini…
Checking path: C:Program FilesNokiaPhoenixProductsRM-356
No ini files found…
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:Program FilesNokiaPhoenixProductsRM-356
Searching for default location of ini…
Checking path: ProductsRM-356
Searching for JAF saved location of ini…
Checking path: C:Program FilesNokiaPhoenixProductsRM-356
No ini files found…
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:Program FilesNokiaPhoenixProducts\
Searching for default location of ini…
Checking path: Products\
Searching for JAF saved location of ini…
Checking path: C:Program FilesNokiaPhoenixProducts\
No ini files found…
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini…
Checking path: C:Program FilesNokiaPhoenixProductsRM-356
Searching for default location of ini…
Checking path: ProductsRM-356
Searching for JAF saved location of ini…
Checking path: C:Program FilesNokiaPhoenixProductsRM-356
Scanning ini files…
Searching for default location of ini…
Checking path: ProductsRM-356
Checking path: C:Program FilesNokiaPhoenixProductsRM-356
FILES SET FOR FLASHING:
MCU Flash file: C:Program FilesNokiaPhoenixProductsRM-356RM-356_60.0.003_prd.core.C00
PPM Flash file: C:Program FilesNokiaPhoenixProductsRM-356RM-356_60.0.003_prd.rofs2.V19
CNT Flash file: C:Program FilesNokiaPhoenixProductsRM-356RM-356_60.0.003_C01_prd.rofs3.fpsx
APE Variant file: C:Program FilesNokiaPhoenixProductsRM-356RM-356_60.0.001_026_000_U01.uda.fpsx
Languages in ppm: English,Philipines,Bangladesh,Australia,Indonesia,India,Vietnam,New Zealand
Detected P-KEY: 9000AAC9
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
Error reading phone init data…
Detected P-KEY: 9000AAC9
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
Error reading phone init data…
Detected P-KEY: 9000AAC9
P-key nokia module version 01.02
Init usb communication…
PRESS POWER ON NOW!
Searching for phone…Found
Sending RAW loader…
Using 009.012.005
Elf2flash 09.11.000
CMT RAW loader…
Patching RAW boot step1…
Patching RAW boot step2…
Patching RAW boot step3…
Sending RAW Loader…
………………..Loader Sent!
Stage 2 starting………………PUBKEYS already sent…
PUBKEYS already sent…
PUBKEYS already sent…
PUBKEYS already sent…
PUBKEYS already sent…
………..Phone prepared OK!
Waiting for the phone to boot…
Searching for phone…
Status byte: 8000
Selecting CMT flash…
Result: 0000
Phone is in flash mode…
CMT blocks: 615, APE blocks: 0
Erasing cmt…
Processing C:Program FilesNokiaPhoenixProductsRM-356RM-356_60.0.003_prd.core.C00…
Erasing cmt zone 00040000 – 00082FFF … Erase result: 0000
Erasing cmt zone 00083400 – 003FFFFF … Erase result: 0000
Erasing cmt zone 00400000 – 007FFFFF … Erase result: 0000
Erasing cmt zone 00800000 – 00D5FFFF … Erase result: 0000
Erasing cmt zone 00D60000 – 09E5FFFF … Erase result: 0000
Partition result: 0014
Processing C:Program FilesNokiaPhoenixProductsRM-356RM-356_60.0.003_prd.rofs2.V19…
Erasing cmt zone 07180000 – 0915FFFF … Erase result: 0000
Processing C:Program FilesNokiaPhoenixProductsRM-356RM-356_60.0.003_C01_prd.rofs3.fpsx…
Erasing cmt zone 09160000 – 09E5FFFF … Erase result: 0000
Processing C:Program FilesNokiaPhoenixProductsRM-356RM-356_60.0.001_026_000_U01.uda.fpsx…
Erasing cmt zone 09E60000 – 0F71FFFF … Erase result: 0000
Send CMT CFG…
Writing cmt…
Processing C:Program FilesNokiaPhoenixProductsRM-356RM-356_60.0.003_prd.core.C00…
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending…
cmt->PAPUB keys already sent…
cmt->PAPUB keys already sent…
cmt->PAPUB keys already sent…
cmt->PAPUB keys already sent…
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*ENO
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS+CORE
Sending CMT HASH for SOS+ROFS1
Processing C:Program FilesNokiaPhoenixProductsRM-356RM-356_60.0.003_prd.rofs2.V19…
Sending CMT HASH for SOS+ROFS2
Write result 27: 1701
Processing C:Program FilesNokiaPhoenixProductsRM-356RM-356_60.0.003_C01_prd.rofs3.fpsx…
Sending CMT HASH for SOS+ROFS3
Write result 27: 1701
Processing C:Program FilesNokiaPhoenixProductsRM-356RM-356_60.0.001_026_000_U01.uda.fpsx…
Rebooting…
Finishing CMT session…
Restarting CMT…
Pooling phone…
MCUSW: V ICPR72_10w29_tube1
24-05-11
RM-356
(c) Nokia
APESW: V 60.0.003
VariantSW: V 60.0.003
Prodcode: 059B9L7
Done!
Hi Rupendela, what did u do to solve the problem of ‘error reading phone ini data’. I am stuck with the same problem.
Thank you
One particular of the main variables that result in substantial damage to our skin cells is exposure to
ultraviolet radiation of the sun.
But, then as you have limited alternatives for a no-carb breakfast menu, you can
take into account these as breakfast options.
Great wrk!
SEARCHING FOR PONE NOT FOUND
PLZ HELP
Amazing… Please upload another method also… Thank you ma friend…
While flashing , JAF says that –
” Error getting Flash id ”
How can i solve it ?
Sir Please help me when iam flashing my mobile nokia 5233 rm 625 with rack star belle with the help of jaf tool nokia 5233 is not in list
hi,
I want 2 flash my phone nokia c2-00 and i m not getting the model no of my phone.
I was flashing using JAF Setup 1.98.6.
—–plz help me——-
Plzz..
I need help. M a newbe.. here.
I bricked my n96 rm 247 & nw m getting error ” failed to startup . Contact reseller”. 🙁
I think flashing eno file for my device will solve the problem as the internal memory might have got corrupt.
I hav downloaded the eno file but m unable to select it in the MCU window of bb5 (jaf) as it accepts only .c0r file and not fbsx file which I have. ..
Please guide me what ( & how ) it should be done.
sir I have an error in step 8 the green light is not on after i entered my model no.
What i want to do. pls help me
i cannot find x3-02 on the mobile phones listed.. 🙁 HELP ASAP
hey man this program cannot to find my phonr nokiax6 rm-559 how i do ?
Excellent””I love it!
do not work for asha 200 RM-761 I cannot find it to select INI model ..anyone know anything how to do with this model of nokia 200
plz help me guys…….. my nokia n8 was dead. i tried to make it alive by using pheonix, jaf ,and also nokia care suite.
but those weren’t worked out.
when flashing with jaf, usb not detecting my phone. plz help me
I’m wondering does it needs any hardware or smthing? or i could use it with the simple nokia usb ?
In jaf i don’t find nokia 5230 or 5233 wht can i do ?
My phone model nokia asha 200 was nt found
Pingback: How To Use | Latest News
go to google and search for latest jaf_nok4models.ini file and download it and copy to c://progam files/odeon/jaf.
after that open jaf tool and you can see the newer version of phone models in the list.
ya thanku i hav done this and i got my model (2690) but its not showing green on ((MCU, PMM, CNT)) wat to do plz help me
i have downloaded newer latest jaf_nok4models.ini file and copeid to c://progam files/odeon/jaf. after tat i hav founded my mobile model(2690) but when i choose tat its not showing green in ((MCU, PMM, CNT)) what to Do … plz tell me
Fiz todo o processo e no final na hr de procurar o telefone…diz Telefone não encontrado. O que eu faço?
why is it my anti virus detect that this software is a virus??
HRESULT 0x8401f141 (-2080247487)
Flash: Boot rom was not detected after phone boot up. Unable to start flashing.
this is obtai then what can i do
HELP.. How can i flash an android phone with my MIRACLE box and which box can i buy that will flash blackberry
Thnx a lot.and tell me how to flash android and get ROMs of any android?
Can we install and flash Nokia fones without jaf or any ufs?only computer to fone?
After selecting “Use INI“, it will automatically open a list of Phone Model.
But doesn’t include my phone model i.e., nokia asha 302 whats the problem … ?
New
Pingback: How To Fix Nokia Error Phone Startup Failed in Windows
this is awesome. thanks sir 🙂
hw can i dwnlod d nokia firm ware whn my fone is dead
It’s an concept that men and women generally search just as much as celebs with cult like alongside come up
with some grand new types which you’ll imitate. It’s an effective fact that
sedu hair straightner offers your hair a more or a lesser amount of steady organic form which is quite controllable also.
What was added to your game managed to get very enjoyable to experience, and gave additional items in your case to have a good time backyard parties, which had been lacking prior
to addition of these items pack. The the elderly do have reservations about surgeries
simply because belong to a period when a surgery only agreed to
be a cut from the body and managed very serious issues.
sofia, get latest jaf ini file. it should be there. i have flushed a lot of asha 302, and many more.
admin please help, i had added my nokia asha 210.3 rm-925 to jaf ini file like how you’ve described on ur blog. it was visible to be selected but when jaf ask me to press power on key to find the device, it fails to find it with the error message: “phone not found “. what seem to be the problem when it doest that and what should i do to flash it successfully? pls help.
in model list nokia x2-00 is not given so why should i do?
How to flash Nokia c200
xzxzxz sxds sss nokia
Test a life style that mean someting
Can’t detect flashing server what do to….
My fone is nokia_ e72-1 it keeps switching off then on by itself about every 2 or 3 minutes how can i solve this problem please help very desperate.
I see your site needs some unique & fresh content. Writing manually is time
consuming, there is tool for this task. Just search in g00gle
for ; rilkim’s tips
thanks for help…. finally flash done!
I have dead Nokia 7710…after startup it shows Nokia logo….and then complete white screen
i tried JAF box using RM-12…but after clicking on flash button… and powered on the device its shows phone not found….
and suggestion
If you are interested in topic: make money taking pictures of products – you should read about Bucksflooder first
If you are interested in topic: earn money online lifehacker windows – you should read about Bucksflooder first
hello jaf software recovery is not downloading?
Hi admin, i must say you have very interesting content here.
Your page should go viral. You need initial traffic only.
How to get it? Search for: Mertiso’s tips go viral
Pingback: Error Cannot Detect Phone On Fbus Interface
Pingback: Nokia 2700 Cmt Error
Pingback: Jaf Error Jcsimu_open_socket Connect Socket 10061
well blog thank you for share nokia 220 flash file 🙂
Pingback: Jaf Flashing Error Booting Phone
thanks ????
I see you don’t monetize your website, don’t waste your traffic, you can earn additional bucks every month because you’ve got high
quality content. If you want to know how to make extra $$$, search for: Boorfe’s tips best adsense
alternative
wow nice very helpfull post
I have checked your blog and i’ve found some duplicate content, that’s why you don’t rank high
in google’s search results, but there is a tool that can help you to
create 100% unique content, search for: Boorfe’s tips unlimited content
wel post bro keep it up
https://www.youtube.com/watch?v=VYORsLkSnyE&
https://youtu.be/_AdEHIxWz4U
https://www.youtube.com/channel/UCRomIP4bmASg6JdbSQfXm5Q
https://youtu.be/xZ_2uH4iniM
https://www.fiverr.com/sakmiah
https://youtu.be/DZyET7Mryso
https://flashfile9.blogspot.com/2017/12/micromax-q334-flash-file.html
https://nokia-flash-file-download.blogspot.com/
http://www.flashfile9.com/
https://9flashfile.blogspot.com/
https://flash-file-nokia.blogspot.com/
https://hard-reset9.blogspot.com/
Hi, is anybody here interested in online working?
It is simple survey filling. Even $10 per survey (10 minutes of work).
If you are interested, send me email to hansorloski[@]gmail.com
can’t detect flashing server jaf